Scale range from -0.1 to 0.9 MPa (customizable). Set point accuracy from -30~+50 °C, ±1.0%FS (±10KPa) (gas phase). Degree of protection – IP65. Ambient conditions from -40°C to +60°C. Leakage rate – < 1 × 10-9 Pa-m3/s, relative humidity ≤ 95%RH. Contact type – microswitch. Output signal – RS485 and fibre optic. Protocol – ModBus RTU.
Made in Canada. brand LANSO, model ZMJ80XDR
International delivery to Europe, Asia and Africa.
Our warehouses are located in the UK, UAE and Senegal.
price by request
Available
Only the best I&C brands
Our company is a global supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at very low prices. We provide really advantageous conditions for partners
Fast delivery across the Europe & Asia
We take care of all logistics and customs clearance of I&C solutions from Europe, USA, China and India
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Application of ZMJ80XDR Series Density Monitors
Features of ZMJ80XDR Series Density Monitors
| Scale range: | -0.1 to 0.9MPa (customizable) |
| Set point Accuracy: | –30~+50 ℃，±1.0%FS（±10KPa）（gas phase） |
| Indication accuracy: | +20±1℃，±1.0%FS（±10KPa,0~0.9MPa abs.） |
| +20±1℃，±1.5%FS（±15KPa,1.0MPa abs.） | |
| Sensor accuracy: | calibration point: +20±1℃，±0.8%FS（±8KPa） |
| –30~+50 °C，±1.0%FS（±10KPa） | |
| Degree of protection: | IP65 |
| Ambient conditions: | -40°C to 60°C |
| Leakage rate: | < 1 × 10-9 Pa·m3/s , Relative humidity ≤ 95%RH |
| Pressure connection: | M20 × 1.5, (customizable) |
| Location: | Bottom or back |
| Electrical connection: | Connect the plug when plugging, wire diameter
0.2…2.5 mm2 |
| Insulation properties: | Insulation resistance: >100 MW (500 V DC) |
| Withstand voltage: 2kV, 50/60 Hz 1 min (to case) | |
| Contact type: | Micro Switch |
| Impact rating: | 50g |
| Contact ratings: | 10(1.5)A,250V AC |
| 0.1 (0.05)A,250V DC | |
| Window: | Laminated safety glass |
| Weight: | 1.2kg |
| Pressure sensitive components: | bellows and Bowden tubes |
Main electrical performance indicators and specifications of the remote transmission part
| Power supply: | 24V DC |
| Power consumption: | < 2W |
| Communication mode: | RS485 |
| Protocol: | ModBus RTU |
| Baud rate: | 9600bps |
Anti-electromagnetic interference
| IEC61000-4-2: | level 4 (15kV) |
| IEC61000-4-3: | level 3 (10V / m) |
| IEC61000-4-4: | level 4 (4kV) |
| IEC61000-4-5: | level 4 (+/- 2kV) |
| IEC61000-4-6: | level 3 (10V) |
| IEC61000-4-8: | level 5 (100A / m) |
| IEC61000-4-9： | level 5（1000A/m） |
| IEC61000-4-10： | level 4（30A/m） |
Options of ZMJ80XDR Series Density Monitors
You can request the necessary certificates, documentation, instructions and user manuals for LANSO ZMJ80XDR using the special form.
You can buy LANSO ZMJ80XDR in UK or Europe at a favourable price in «DOLCHETRADE» by leaving a request on the website, by phone +441225535040 or by email dolce@dolcetrade.com. LANSO ZMJ80XDR price are subject to change depending on exchange rates. We deliver instruments by transport companies in the United Kingdom and Europe.
