- stranded Cu wire : 2×0,22 mm2
- 9 mm wide tip suitable for mounting to flat surfaces with M4 screw
- material: stainless steel 1.4541
Products not found
TheSeries TE-WSS Stainless Steel Wall Plate Temperature Sensor measures the ambient air temperature in classrooms and industrial environments.
Retail price from $12,1
Read more
Available
The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.
Retail price from $10,1
Read more
Available
The Series TE-OND/TE-RND/TE-OSA Outdoor Temperature Sensors are offered different configurations to increase measurement accuracy by reducing radiated heat effects. For applications where the north side of the building is accessible, the TE- OND/TE-OSA can be used to protect against low levels of radiated heat.
Retail price from $28,65
Read more
Available
The Series TE-SNW Weather Resistant Surface Temperature Sensor non- intrusively measures the process temperature in hot and cold water loops in buildings. In order to work with most common building controllers, the output of the sensor can be chosen from 6 different RTD and Thermistor curves.
Retail price from $40,75
Read more
Available
The Series AVG Averaging Temperature Sensor can be used to measure the average temperature up stream of the cooling coils in an air handler. The coiled sensor unwinds to a length of 12′ or 24′ to take an average temperature reading across a large space. The housing has multiple knockouts to reduce the time to install conduit. The Series CC1 mounting brackets can be used to secure the capillary to the wall of the air handler without kinking. The Series AVG can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $136.2
Read more
Available
The Series S2-2 General Purpose Surface Temperature Assembly is ideal for monitoring the temperature of indoor distribution lines when it is not possible to penetrate the pipe. The plastic housing is in the shape of a standard junction box with multiple knockouts for easy conduit access. The strap-on connection quickly wraps around a pipe and can be securely tightened using a flat head screw driver. The Series S2-2 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $73,25
Read more
Available
The Series S2-4 Weatherproof Surface Temperature Assembly is ideal for monitoring the temperature of distribution lines when it is not possible to penetrate the pipe. The strap-on connection quickly wraps around a pipe and can be securely tightened using a flat head screw driver. The twist-off housing cover reduces installation time. The housing has multiple knockout conduit holes which allows the installer to bring conduit to any side of the housing. The Series S2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $110,4
Read more
Available
The Series I2-4 Weatherproof Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines feeding Air Handlers and Cooling Towers. The plastic housing has a 1/4 turn twist off cover to reduce installation time. The multiple knockouts allow for easy conduit access to any side of the housing. The Series I2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $44,25
Read more
Available
The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building’s water distribution loop. The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. The Series IW2 stainless steel thermowells allow the temperature sensors to be replaced without draining the water line. The temperature sensors are available in 4″ and 6″ insertion lengths.
Retail price from $25,8
Read more
Available
The Series I2-2 General Purpose Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines throughout a building or mechanical room. The plastic housing is in the shape of a standard junction box with multiple knockouts for easy conduit access. The locking cover prevents unauthorized occupants from tampering with the temperature sensor. The Sensor I2-2 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $34,3
Read more
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire and rotary nut.
- thread G⅛
- stranded Cu wire 2×0,22 mm2 or 4×0,22 mm2 with double silicone insulation
- material: stainless steel 1.4541
price by request
Read more
Available
Cable sensor can be equipped with plug for connection with portable temperature meters.
- performance with head MA
- PVC hand grip max. operating temperature 80°C
- with transmitter 4÷20 mA (LTT-03J)
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor with handgrip and pointed tip suitable for measurement of various types of meat and cold meat . It has an attestation issued by National Institute of Hygiene(PZH) for usage in contact with food because of the special materials it is made of.This sensor is terminated with miniature plug that enables its connection to portable temperature meter TES.
- steel or tefl on hand grip
- suitable for food industry
- National Institute of Hygiene (PZH) attestation
- sheath material: acid-resistant steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: boilert steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Read more
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷600ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Read more
Available
Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed.
price by request
Read more
Available
Cable sensor can be equipped with plug for connection with portable temperature meters.
- performance with head MA
- PVC hand grip max. operating temperature 80°C
- with transmitter 4÷20 mA (LTT-03J)
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor with handgrip and pointed tip suitable for measurement of various types of meat and cold meat . This stainless steel sensor has attestation issued by National Institute of Hygiene (PZH) for usage in contact with food.
- stainless steel 1.4541 hand grip
- suitable for food industry
- National Institute of Hygiene (PZH) attestation
- sheath material: acid-resistant steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: stainless steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Read more
Available
Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷150ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type MA IP54 – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Read more
Available
Temperature sensor with band clamp for measurement of pipes and shafts. The band clamp enables sensor installation on different types of pipes and shafts which are to be measured.
- pipe band clamp diameter 16÷180 mm
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4301
price by request
Read more
Available
Temperature sensor suitable for measurement of surface to which it is attached. On the bottom of plastic housing aluminium radiator is placed, transferring heat from the adjacent surface. Thermometric resistor is placed in the radiator. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.
- tangent surface temperature measurement
- measuring plate
- housing: material polycarbonate, IP67
- material: aluminium
price by request
Read more
Available
Temperature sensor with special sanitary flange connection Clamp type suitable for measurement in food and pharmaceutical industry. It has National Institute of Hygiene (PZH) attestation.
- process connection fl ange Clamp acc. to PN-ISO 2852
- connection head type MAA, BA; IP 54 -40÷100ºC
- MBEG, BEG – material: stainless steel 1.4541, IP65, -40÷100°C
- sheath material: acid-resistant steel 1.4541
- National Institute of Hygiene (PZH) attestation
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: acid-resistant steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Read more
Available