TSI AeroTrak-Plus 7010 Remote Active Air Sampler

Description of TSI AeroTrak-Plus 7010

With active flow measurement and proactive flow alarms, the AAS allows cleanroom technicians to correct facility conditions
before monitoring is affected to reduce production waste. The AAS integrates into TSI® Facility Monitoring Software to put
critical data at your fingertips – without worry of data interruption or loss.

Features and Benefits

Reliable Measurement

• Easy compliance with FDA cGMP and EU GMP regulations by way of low d50 (0.8 µm) and active flow measurement
• Quick corrective action driven by real-time flow measurement warnings—e.g., kinked tubing, vacuum loss, etc.
• Design specific for Grade A and B environments with traceable materials and thoughtful accessories
• Reduced interventions to change agar plates through intermittent sampling

Confident Results

• Complete environmental monitoring system by TSI® with integrated total particle and microbial monitoring
• Hassle-free data integrity with FMS Software integration and automated, sample-based reporting
• Secure shareability—OPC UA interface to LIMS
• Distributed architecture without common points of failure
• No lost data—sampling completes even if network fails

Technical specifications of TSI AeroTrak-Plus 7010

• Flow Rate: 28.3 LPM (1.0 CFM) with ±5% accuracy
• Sampling Method: Sieve impaction
• d50: 0.8µm per ISO 14698-1:2003
• Sampling: Continuous or Intermittent
• Vacuum Source: External vacuum > 15 in. (38.1 cm) of Hg
• Control Box Enclosure: Stainless steel
• Sample Head (Base and Cap): 316L SS
• Recommended Tubing (Between Sample Head and Control Box): 0.5 in. ID x 0.625 in. OD 20 m maximum length
• Agar Plate Recommended Dimensions: 90 mm agar plate, deep fill (27 ml)
• Standards: CE
• Operating Environment: Indoor use only
• Temperature: 50° to 104°F (10° to 40°C)
• Relative Humidity: 20% to 95% non-condensing
• Altitude: <10,000 ft. (3,050 m)
• Pollution Degree: 1
• Communication: TSI® FMS 5 Monitoring System
• Status Indicator: Power, flow, sample and ethernet
• Data Storage: 256,000 sample records
• Dimensions (HxWxD) Sample Head: 4.5 in. x 3.4 in. (11.4 cm x 8.6 cm)
• Control Box (H x W x D): 5.6 in. x 4.5 in. x 2.6 in. (14.2 cm x 11.4 cm x 6.7 cm)
• Weight Sample Head: 1.3 lb. (0.59 kg)
• Control Box: 2.3 lb. (1.05 kg)
• Power: Power-over-Ethernet (PoE compliant with IEEE 802.3at) or 12-24 VDC @ 30W
• Relay Load: 0.5 A at 125 VAC; 2 A at 30 VDC
• Overvoltage Category: II
• Storage Range: 14° to 122°F (-10° to 50°C) / Up to 98% non-condensing
• Included Accessories: Power connector, 90 mm plate standoffs, and operating manual and configuration utility on USB flash drive
• Optional Accessories: Sample cap, power supply, plate holder, exhaust filter, sanitary fitting inlet, tri-clamp fittings, alarm cable, sample tubing, vacuum tubing and mounting bracket