Only the best I&C brands
Our company is a global supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at very low prices. We provide really advantageous conditions for partners
Fast delivery across the Europe & Asia
We take care of all logistics and customs clearance of I&C solutions from Europe, USA, China and India
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
Federal Reference Methods (PM2.5, PM10) and equivalent mass based methods cannot quantify the amount of UFP in the air. The EPC™ monitor provides quantitative UFP concentration data to supplement mass based and FRM equivalent methods. This freshly engineered water- based condensation particle counter detects ultrafine particles down to 7 nanometers and delivers robust field performance. The EPC™ monitor is a good choice for indoor and outdoor ambient monitoring and many other applications that require 24/7 operation.
Flexibility
Targeted at unattended monitoring, the 3783 is easy to use, requires minimal maintenance, and has a variety of configuration choices, including:
Features and Benefits
Enhancement | Design Feature |
---|---|
Concentration Accuracy | Optimized wick material and wick geometry Pulse height analyzer to monitor wick health, supersaturation state, and instrument status. |
Flow Rate Stability | Critical orifice air flow scheme (no need for flow control orifice) Large surface area internal filters Mechanical nozzle optimization to reduce/eliminate nozzle clogging |
Problem Free Operation | Robust new water handling scheme featuring an active water removal system (water separator) Inlet pressure monitor to prevent flooding Minimized Internal Reservoir Reduced water consumption Active drain pump Expanded operating temperature range |
Precision Measurements | Enhanced zero count stability Real time clock |
On-board Instrument Diagnostics | Nozzle pressure transducer to monitor nozzle health Laser reference detector Expanded software instrument status screen |
Convenience & Flexibility | Easily accessible inlet screen assembly Wick cartridge for quick wick replacement Removable, swappable optics modules |
Particle Size Range | |
---|---|
Min. Detectable Particle (D50) | 7 nm, verified with DMA-classified sucrose |
Max. Detectable Particle | > 3 μm |
Particle Concentration Range | |
Single Particle Counting | 0 to 106 particles/cm3, with continuous live-time correction |
Particle Concentration Accuracy | |
±10% at 106 particles/cm3 | |
Response Time | |
High-flow Mode | < 3 seconds to 95% in response to concentration step change |
Low-flow Mode | < 5 seconds to 95% in response to concentration step change |
Flow | |
High-flow Inlet | 3 ±0.3 Liters/minute |
Low-flow Inlet | 0.6 ± 0.06 Liters/minute |
Aerosol Flow Rate | 120 ±12 cm3 /minute |
False Background Counts | |
< 0.01 particles/cm3 , 1-hour average for Dewpoint < 30°C (i.e. < 35°C at 75% RH) | |
Environmental Operating Conditions | |
Ambient Temperature Range | 10 to 38°C (50 to 100.4°F) |
Ambient Humidity Range | 0 to 90% RH, non condensing |
Aerosol Medium | |
Air only | |
Inlet Pressure Operation (Absolute) | |
50 to 110 kPa (0.5 to 1.1 atm) | |
Inlet Pressure (Gauge) | |
0 to -5 kPa (-20” H2O) | |
Condensing Liquid | |
Water, distilled (< 6ppm) or HPLC water. Tap water must not be used | |
Water System | |
External 1 L bottle for up to 4 weeks operation | |
Water Consumption | |
250 mL/week | |
Vacuum | |
Requires external vacuum; recommended 6 std. L/min at 400 mbar. | |
Communications | |
Protocol
|
ASCII command set interfaces 9-pin, D-Sub connector Type B connector, USB 2.0 compatible at 12 MB 8-wire RJ-45 jack, 10/100 BASE-T, TCP/IP |
Data Logging | USB flash drive |
Averaging Interval | 1, 2, 4, 5, 6, 10, 12, 15, 20, 30, or 60s software provides more avg. options |
Outputs | |
Digital Display | 6” VCA color touch screen with graphical interface. Graph of concentration vs. time, concentration, time and total counts, and status |
Analog Output | BNC connector, 0 to 4V proportional to log conc. |
Digital Output | Data download using USB or RS-232 serial interface. |
Software | |
TSI Aerosol Instrument Manager® CPC software included. Not SMPS™ spectrometer compatible. | |
Calibration | |
Recommended annually. | |
Power Requirements | |
100 to 240 VAC, 50/60 Hz 175 W maximum | |
Connections | |
Inlet | 1/4” tube |
Low-flow Inlet | 1/4” Swagelock® tube fitting |
Dimensions (H x W x D) | |
20.3 x 48.3 x 30.5 cm (8 x 19 x 12 in.) | |
Weight | |
9.9 kg (22 lbs) |
You can request the necessary certificates, documentation, instructions and user manuals for TSI 3783 using the special form.
You can buy TSI 3783 in UK or Europe at a favourable price in «DOLCHETRADE» by leaving a request on the website, by phone +441225535040 or by email dolce@dolcetrade.com. TSI 3783 price are subject to change depending on exchange rates. We deliver instruments by transport companies in the United Kingdom and Europe.