Made in USA. brand MSA Safety, model Ultima X
International delivery to Europe, Asia and Africa.
Our warehouses are located in the UK, UAE and Senegal.
price by request
Available
Only the best I&C brands
Our company is a global supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at very low prices. We provide really advantageous conditions for partners
Fast delivery across the Europe & Asia
We take care of all logistics and customs clearance of I&C solutions from Europe, USA, China and India
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
MSA’s Ultima X Series Gas Monitors are microprocessor-based transmitters engineered with the customer in mind. Utilizing DuraSource Technology for extended sensor life, the monitors are available in either stainless steel or polycarbonate enclosure housings.
Now with SIL 2 Certified Products HART Field Communications Protocol provides increased sensor data, part of cost-effective asset management. HART also provides convenient setup, calibration and diagnostics. Calibrate, set up or perform diagnostics with HART from any point along the 4-20 mA line. HART also allows for existing component install and wiring to be used, reducing installation costs.
GASES
| Acetylene IR- 0-2.5% Ammonia- 0-50% LEL Ammonia- 0-100 PPM Ammonia- 0-1000 PPM Arsine- 0-2 PPM Bromine- 0-5 PPM Carbon dioxide IR- 0-0.5% Carbon dioxide IR- 0-2% Carbon dioxide IR- 0-5% Carbon monoxide- 0-100 PPM Carbon monoxide- 0-500 PPM Carbon monoxide- 0-1000 PPM |
Chlorine- 0-5 PPM Chlorine- 0-10 PPM Chlorine- 0-20 PPM Chlorine dioxide- 0-3 PPM IR combustible gas – Methane- 0-100% LEL IR combustible gas – Non-methane- 0-100% LEL Combustible gas- 0-100% LEL natural gas and H2 Combustible gas- 0-100% LEL petroleum vapors |
Combustible gas0-100% solvents Diborane- 0-50 PPM Ethylene oxide- 0-10 PPM Fluorine- 0-5 PPM Hydrogen fluoride- 0-10 PPM Hydrogen- 0-1000 PPM Hydrogen chloride- 0-50 PPM Hydrogen cyanide- 0-50 PPM Hydrogen sulfide- 0-10 PPM Hydrogen sulfide- 0-50 PPM Hydrogen sulfide- 0-100 PPM |
Hydrogen sulfide- 0-500 PPM Nitric oxide- 0-100 PPM Nitrogen dioxide- 0-10 PPM Oxygen- 0-10% – compensated Oxygen- 0-25% – compensated Oxygen – CO2 tolerant- 0-25% Oxygen – solvent tolerant0-25% Phosphine- 0-2 PPM Silane- 0-25 PPM Sulfur dioxide- 0-25 PPM Sulfur dioxide- 0-100 PPM |
Model
| Ultima XE Gas Monitor – | Ultima XA Gas Monitor – | Ultima XIR Gas Monitor – |
| Explosion-proof, stainless steel gas detector with display | Water- and corrosion-resistant, all-purpose, polycarbonate gas detector with display | Explosion-proof, stainless steel, infrared gas detector with display |
| The Ultima XE Gas Monitor offers: • Explosion-proof 316 stainless steel. • Multiple-entry mounting enclosure. • Type 4X, IP66. |
The Ultima XA Gas Monitor offers: • NEMA 4X rating. • Lightweight (only 1.5 lbs). |
The Ultima XIR Gas Monitor offers: • DuraSource Technology for improved IR sensor life. • 316 stainless steel. • Multiple-entry mounting enclosure. • Fast response time. • Operation based on dual-wavelength, heated-optics technology, providing definitive compensation for temperature, humidity, and aging effects. • IR technology for excellent long-term stability, eliminating the need for frequent calibrations. • Sintered disk-free design for optimum performance in harsh environments. • No-gas calibration; only zero adjustment is required for full calibration. • Type 4X, IP66 rating |
| GAS TYPES | XE,XA XIR |
Combustibles, oxygen, and toxics Combustibles; 0-100% LEL |
|
| TEMPERATURE RANGE | -40° C to +60° C (-40° F to +140° F) (Typical range for some gases may differ) |
||
| DRIFT | Zero Drift Span Drift |
XE, XA XIR XE, XA |
<5%/year, typical ±2%/year, typical <10%/year, typical |
| NOISE | <1% full scale | ||
| ACCURACY | Repeatability Linearity |
XE, XA, XIR XE, XA XIR XE, XA XE, XA, XIR XE, XA |
±1% full scale or 2ppm, typical ±2% full scale or 2ppm, (O2, CO) ±2% full scale (≤50% LEL) ±3% full scale (<50% LEL combustibles) ±5% full scale (>50% LEL combustibles) ±10% full scale or 2 ppm, (non-CO toxics) |
| RESPONSE TIMES | T20 O2 & toxics T50 O2 & toxics T50 combustible T90 combustible T90 combustible |
XE, XA XE, XA XE, XA XE, XA XIR |
<12 seconds (typically 6 seconds) <30 seconds (typically 12 seconds) <8 seconds <30 seconds <2 seconds |
| HUMIDITY | XE, XA XIR |
15%-95% RH, non-condensing 0%-95% RH, non-condensing |
|
| SENSOR LIFE | Oxygen & toxics Combustible Combustible Warranty |
XE, XA XE, XA XIR |
2 years typical 3 years typical 10 years typical 1 year XE, XA; 2 years XIR; 10 years XIR, XI (IR source only) |
| POWER INPUT | XE, XA XE, XA XIR |
8-30 VDC (oxygen and toxics) 2.4 W max 8-30 VDC (combustibles) 5.0 W max 10-30 VDC 7.0 W max |
|
| WIRING REQUIREMENTS | Combustible Oxygen & toxics Oxygen & toxics |
XE, XA, XIR XE, XA XE, XA |
3-wire 2-wire; no LEDs or relays 3-wire; LEDs and/or relays |
| SIGNAL OUTPUT | XE, XA XE, XA, XIR XE, XA, XIR |
4-20 mA 2-wire current sink 4-20 mA 3-wire current sourceHART Output |
|
| RELAY CONTACT RATING | 5 amp @ 220 VAC; 5 amp @ 30 VDC | ||
| HOUSING ENTRIES | XE, XIR XA |
Four conduit entries, 3 ⁄4″ NPT or 25 mm One entry |
|
| PHYSICAL | XE XA XIR |
316 stainless steel; 10.4 lbs (4.7 kg) 6.3″ W x 3.9″ D x 10.3″ L (160 x 99 x 261 mm) Polycarbonate; 1.5 lbs (0.68kg) 5.1″ W x 2.9″ D x 9.4″ L (130 x 76 x 239 mm) 316 stainless steel; 10.8 lbs (4.9 kg) 12.6″ W x 3.9″ D x 5.7″ L (320 x 99 x 144 mm) |
|
| APPROVAL RATINGS | Ultima X Series Monitors XA Ultima X Series Monitors Ultima X Series Monitors (not including X3 Technology or Hart) |
USA/Canada cFMus, cULus, CSA Class I, Div. 1 and 2, Groups A, B, C, D Class II, Div. 1, Groups F & G, Class III Type 4X, IP66 ANSI/ISA 12.13.01 CSA C22.2 No.152, Class I, Div. 1, Groups A,B,C,D CSA C22.2 No. 152, Class I, Div. 1, Groups B,C,D (XIR) NEMA 4X rating Europe CE Low Voltage/EMC/ATEX, EN 60079-1 11 2G Ex d 11C T4 IP 66 SIL Certification SIL 2 @ HFT=0 (oxygen, catalytic combustible, and IR) SIL 1 @ HFT = 0: SIL 2 @ HFT = 1 (toxic |
You can request the necessary certificates, documentation, instructions and user manuals for MSA Safety Ultima X using the special form.
You can buy MSA Safety Ultima X in UK or Europe at a favourable price in «DOLCHETRADE» by leaving a request on the website, by phone +441225535040 or by email dolce@dolcetrade.com. MSA Safety Ultima X price are subject to change depending on exchange rates. We deliver instruments by transport companies in the United Kingdom and Europe.
See also: Gas detectors & analysers
