Made in USA. brand MSA Safety, model IR5500
International delivery to Europe, Asia and Africa.
Our warehouses are located in the UK, UAE and Senegal.
price by request
Available
Only the best I&C brands
Our company is a global supplier of control and measuring instruments from well-known world brands
Discounts for organisations
We sell high-tech equipment at very low prices. We provide really advantageous conditions for partners
Fast delivery across the Europe & Asia
We take care of all logistics and customs clearance of I&C solutions from Europe, USA, China and India
Professional advice on device selection
Our specialists are ready to advise you on any technical question. We can find an analogue of any device
| System Specifications | |
| Sensor type | Infrared Absorption |
| DUAL RANGES
METHANE PROPANE |
0 to 5000 ppm• meter
0 to 5 LEL• meter 0 to 2000 ppm• meter 0 to 1 LEL• meter Consult factory for other hydrocarbon gases available |
| PATH LENGtHS | 5-30 m, 20-100 m, 80-150 m |
| RESPONSE TIME | T90 ≤ 3 s |
| REPEATABILITY | ≤ ±5% |
| LINEARITY | ≤ ±5% of full scale for each scale
or ±10% of applied gas, whichever is greater |
| CLASSIFICATION
HAZ LOC PERFORMANCE VERIFIED |
CSA/FM:
Class I, Div 1 & 2, Groups B, C, & D; Class II, Div 1 & 2, Groups E, F, & G Class III; Type 4X T3C (Tamb=-60°C to +75°C) T4 (Tamb=-50°C to +65°C) ATEX/IECEx: II 2 G D, Ex d IIB+H2 T4 Gb Ex tb IIIC T135°C Db, IP66/67 (Tamb=-55°C to +65°C) |
| CALIBRATION | No calibration required. Field background zero adjustment provided |
| MODES | Setup, alignment, test mode |
| ACCESSORIES | Test gas films, mounting arm, mounting base, scope, attenuation plate |
| WARRANTY | Two years |
| APPROVALS | CSA, FM, ATEX, IECEx, DNV-GL, INMETRO, EAC, CE. SIL 3 suitable. HART registered. |
| Mechanical Specifications | |
| HOUSING | 316 stainless steel |
| SOURCE | 5.3″ dia. x 12.4″ length
(135 mm dia. x 315 mm length) |
| RECEIVER | 5.3″ dia. x 12.4″ length
(135 mm dia. x 315 mm length) |
| WEIGHT | Source: 12.20 lb (5.53 kg)
Receiver: 12.34 lb (5.60 kg) |
| CONDUIT ENTRIES |
¾” NPT (standard), M25 (optional) |
| Environmental Specifications | |
| OPERATING TEMPERATURE RANGE | -67°F to +149°F (-55°C to +65°C) |
| OPERATING
HUMIDITY RANGE |
10-95% RH, non-condensing |
| Electrical Specifications | |
| INPUT POWER | 20 to 36 VDC range, 24 VDC nominal
24 VDC @ 12 W (max.) – source 24 VDC @ 10 W (max.) – receiver (w/relays) Consult factory for lower power consumption options for other configurations |
| DUAL ANALOG SIGNALS
0 MA* 1.5 MA* 2 MA* 4-20 MA** 4-12 MA*** 12-20 MA*** 21.7 MA |
700 ohm load max.
0-5000 ppm• meter 0-5 LEL• meter Startup/Fault Startup/Fault Test Gas/Setup Test Gas/Setup Beam Block Beam Block 0-5000 ppm• m 0-5 LEL• m 0-5000 ppm• m — — 0-5 LEL• m Over-range Over-range |
| RELAY RATINGS | 8 A @ 250 VAC/8 A @ 30 VDC res. max.
Four (4) SPDT – Fault; ppm Warning, LEL Warning; and Alarm |
| RS-485 OUTPUT | Modbus RTU with block and single data transfer modes |
| BAUD RATE | 2400, 4800, 9600, 19200, or 38400 BPS |
| HART | Fully HART compliant |
| EMC PROTECTION | Complies with EN 61000-6-4 and EN 50270 |
| SAMPLE CABLE DISTANCES | For cable resistance of 3 ohms/1,000 ft, maximum distance between IR5500 and power source @ 24 VDC:
14 AWG – 1,330 ft (405 m) – receiver, 14 AWG – 1,040 (317 m) – source. |
| DIGITAL DISPlAY | LED indication of scale displayed; Two digit, seven segment (auto range change) |
| STANDARD
CONFIGURATION |
IR5500-1-1-1-1-2-2-1-1-1-1 Methane, Dual 0-20 mA, HART,
relays, mounting arm, 20-100 m path length |
You can request the necessary certificates, documentation, instructions and user manuals for MSA Safety IR5500 using the special form.
You can buy MSA Safety IR5500 in UK or Europe at a favourable price in «DOLCHETRADE» by leaving a request on the website, by phone +441225535040 or by email dolce@dolcetrade.com. MSA Safety IR5500 price are subject to change depending on exchange rates. We deliver instruments by transport companies in the United Kingdom and Europe.
See also: Gas detectors & analysers
