GEORGIN TiXo3 HART Programmable converter

Technical specifications of GEORGIN TiXo3

Electrical data

• Input: Programmable (refer to backside)
• Output: 4/20 mA
• Power supply:
  Standard model 10V … 30 Vdc
  ATEX version 10V … 28 Vdc
• Galvanic isolation: 1500V CA
• Accuracy: ≤ 0.1% F.S. or ≤ basis accuracy (refer to backside) according to the most important value
• Load resistance: (Vsupply-10) / 0.0215 Ω
• Shorted or broken line detection: Configurable 3.5 mA to 21.5 mA (NAMUR NE43)
• Warm-up time: 5 minutes
• Response time: < 2 s
• Drift:
  Voltage supply: ≤ 0.01% of the current in the loop for a variation of 0.1% of Vsupply
  Temperature: ≤ 10% of accuracy / degree
• Error due to CJC: 1.5x basis accuracy for a cold junction at 0°C to be added
• Line resistance effect:
  RTD100 2wires* / 3wires** 2.5°C/ Ω
  RTD1000 2wires* / 3wires** 0.25°C/ Ω
  Ni100 2 wires* / 3 wires** 2°C/ Ω
  Ni1000 2 wires* / 3 wires** 0.2°C/ Ω
  * : compensation is configurable / ** : unbalance between wires
• EMC Immunity < 0.1% F.S.

Mechanical data

• Housing: Plastic (PBT) Ø = 44 mm H = 21.6 mm
• Protection: IP 00 on terminals
• Weight: approx. 40 g
• Working T°: -40°C to 85°C (non ATEX version)
• Storage T°: -40°C to 85°C
• Relative humidity: 5%-95% without condensing
• Connection: Screw terminals – capture screws
• Max. wire size: 1x 1.5 mm²

Certifications

• EMC: EN 61326 & IEC 61000-6-2
• For ATEX products:
  Intrinsic Safety:
  EN 60079-0 & EN 61241-0
  EN 60079-11 & EN 61241-11
  EN60079-26
  “n” type of protection EN 60079-15
• Certificate N°:INERIS 08ATEX0004X & 08ATEX3002U
• ATEX Classification:
  CE 0081 II 1 GD Ex ia IIC
  CE 0081 II 1 GD Ex iaD 20
  CE II 3 G Ex nA II
• Ambiante working T° T4 : -40°C < ambiante T° < 85°C
  T5 : -40°C < ambiante T° < 65°C
  T6 : -40°C < ambiante T° < 50°C