Products not found
Temperature sensor suitable for measurement of pipes and shafts. Rigid sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft.
- radiator enhancing surface of heat reception with band clamp for mounting on a pipeline DN 15÷200 mm
- insulated hot junction SO
- material: brass
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷300ºC TC
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- thermowell material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has double protection tube: inner ceramic and outer made of heat resistant steel.
- Temperatura range: -40÷1200ºC K
- sensing element: S thermocouple
- connection head type AA IP53 – 40÷100ºC
- sheath material: steel 1.4762, 1.4841, and ceramic
- temperature transmitter can be mounted in a connection head
price by request
Available
Sensor applied for temperature measurement of movable and exposed to vibrationparts of machines and devices.
- mineral insulated thermocouple (K), material: Inconel 600
- connector and tip material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquids, semifluid masses or loose materials in tanks. Temperature measurement can be carried out on three different levels at the same time.
- connection head type AA IP53, – 40÷100ºC
- temperature transmitter can be mounted in a connection head
- material: stainless steel 1.4541, 1.4571 and INCONEL
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- process connection with G1/2 or M20x1,5, 1/2NPT thread
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541, flange PN16, DN20. DN25
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.
- Temperatura range -40÷150ºC TC
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has ceramic protection tube.
- Temperatura range: 600÷1700ºC B
- ceramic tube: mullite 610 or corundum 799
- connection head type AA IP53, – 40÷100ºC
- sheath material: acid-resistant steel 1.4841, and ceramic
- temperature transmitter can be mounted in a connection head
price by request
Available
- sheath construction is suitable for temperature measurement of plastic
- movable connector ½ – UNF
- oval tip
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, good vibration and shock resistance, and low thermal inertia.
- mounting elements: nickel-plated brass and stainless steel
- straight or angular version
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 or 1.7335
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷600ºC TC
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has double ceramic protection tube.
- Temperatura range: -200÷1200ºC K
- sensing element: K thermocouple
- holding tube material, ceramic, mulit 610, corundum 799
- connection head type AA IP53 – 40÷100ºC
- sheath material: acid-resistant steel 1.4541 and ceramic
- temperature transmitter can be mounted in a connection head
price by request
Available
Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed.
- thermocouple stranded wire: 2×0,22 mm2
- 9 mm wide tip suitable for mounting to flat surfaces with M4 screw
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for pipelines, pressure tanks and other devices used in food and pharmaceutical industry. This stainless steel sensor has National Institute of Hygiene (PZH) attestation.
- process connection with M10x1 or M20x1,5 thread
- connection head type MBEG – material: stainless steel 1.4541, IP65 -40÷100°C
- sheath material: acid-resistant steel 1.4541
- national Institute of Hygiene (PZH) attestation
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 flange PN16, DN20, DN25
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷1200ºC K
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type AA IP53, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- Temperature range:
- -40÷300ºC K
- -40÷400ºC K
- connector with bayonet mount
- bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
- material: nickel-plated brass
price by request
Available
Temperature sensor suitable for measurement of flat screws and mandrels. The hole inside the ring enables sensor screwing to flat surface or mounting on the mandrel for temperature measurement.
- end flat or annular
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of aggressive liquid and gaseous media, especially in petrochemical and chemical industry (acids, ammonia).
- material: ceramic SILIT SK
- connection head type BA, IP54, -40÷100ºC
- fi tting assembly and extension pipe: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541, 1.4571, 2.4816
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷1200ºC K
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type AA IP53, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement of movable or replaceableparts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- Temperatura range -40÷400ºC K
- connector with bayonet mount
- bayonet fitting with connector– nickel-plated brass
- material: stainless steel 1.4541
price by request
Available
Temperature sensor with band clamp for measurement of pipes and shafts. The band clamp enables sensor installation on different types of pipes and shafts which are to be measured.
- pipe band clamp diameter 16÷180 mm
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4301
price by request
Available