- thermocouple stranded wire: 2×0,22 mm2
- 9 mm wide tip suitable for mounting to flat surfaces with M4 screw
- material: stainless steel 1.4541
Products not found
The Series ILA In-Line IR Sensors, measure temperatures from 32 to 932°F (0 to 500°C) and provide a linear 4 to 20 mA, or thermocouple output. The 2-wire signal is compatible with almost any indicator, controller, recorder, data logger, etc., without the need for special interfacing or signal conditioning. They are suitable for most materials such as food, paper, textiles, plastics, leather, tobacco, pharmaceuticals, chemicals, rubber, coal, and asphalt.
Retail price from $506,7
Read more
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.
- Temperatura range -40÷550ºC TC
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Read more
Available
Temperature sensor suitable for measurement of industrial processes. Sensing element is placed directly in the sheath.
- Temperatura range -40÷600ºC TC
- sensing element: J thermocouple
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Read more
Available
- sheath construction is suitable for temperature measurement of plastic
- movable connector ½ – UNF
- oval tip
- material: stainless steel 1.4541
price by request
Read more
Available
Cable sensor can be equipped with plug for connection with portable temperature meters.
- performance with head MA
- PVC hand grip max. operating temperature 80°C
- with transmitter 4÷20 mA (LTT-03J)
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ext IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541, 1.4841, 1.4762
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68,cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Read more
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷300ºC TC
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- thermowell material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Read more
Available
Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- Temperature range:
- -40÷300ºC J
- -40÷400ºC J
- connector with bayonet mount
- bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
- material: nickel-plated brass
price by request
Read more
Available
Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed.
price by request
Read more
Available
Temperature sensor suitable for pipelines, pressure tanks and other devices used in food and pharmaceutical industry. This stainless steel sensor has National Institute of Hygiene (PZH) attestation.
- process connection with M10x1 or M20x1,5 thread
- connection head type MBEG – material: stainless steel 1.4541, IP65 -40÷100°C
- sheath material: acid-resistant steel 1.4541
- national Institute of Hygiene (PZH) attestation
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- process connection with G1/2 or M20x1,5, 1/2NPT thread
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541, flange PN16, DN20. DN25
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Read more
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.
- Temperatura range -40÷150ºC TC
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Read more
Available
Temperature sensor suitable for measurement of movable or replaceableparts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- Temperatura range -40÷400ºC J
- connector with bayonet mount
- bayonet fitting with connector– nickel-plated brass
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of flat screws and mandrels. The hole inside the ring enables sensor screwing to flat surface or mounting on the mandrel for temperature measurement.
- end flat or annular
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of aggressive liquid and gaseous media, especially in petrochemical and chemical industry (acids, ammonia).
- material: ceramic SILIT SK
- connection head type BA, IP54, -40÷100ºC
- fi tting assembly and extension pipe: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 or 1.7335
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Read more
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷600ºC TC
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Read more
Available
Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- Temperatura range -40÷400ºC J
- connector with bayonet mount
- bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
- material: nickel-plated brass
price by request
Read more
Available
Temperature sensor with band clamp for measurement of pipes and shafts. The band clamp enables sensor installation on different types of pipes and shafts which are to be measured.
- pipe band clamp diameter 16÷180 mm
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4301
price by request
Read more
Available
Temperature sensor connected with adequate devices enables temperature measurement, control and recording of liquid alloys of non-ferrous metals. It has special ceramic sheath resistant to corrosive action of metals and their alloys.
- ceramics: HEXOLOY, REFRAX or SYALON
- connection head type BA, IP54, -40÷100ºC
- fitting assembly and extension pipe
- thermal shock resistance
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 flange PN16, DN20, DN25
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Read more
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷700ºC J
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type AA IP53, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Read more
Available
Temperature sensor suitable for surface measurement. Hot junction has bigger surface of heat reception because of the connected copper plate or eyelet. This improves sensor contact with the surface.
- cable tip with eyelet, clamped hot junction, surface mounting with M4 or M5 screw
- square or round plate, brazed hot junction
- thermocouple stranded wire: 2×0,22 mm2
price by request
Read more
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: acid-resistant steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Read more
Available