RTD PT500 Temperature Sensors: price list for Europe, Asia & Africa

Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.

Temperatura range -200÷150ºC RTD
sensing element: Pt100/Pt500/Pt1000 resistor
process connection with G1/2 or M20x1,5 thread
connection head type BA IP55, – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TOPE-363/364/365/366 RTD

Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire.

stranded Cu wire: 2×0,22 mm²
hot junction: insulated SO, grounded SP
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPG-M12 RTD

Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of resistor placed in the thin-walled acid-resistant sheath with welded process connection and plug installed on the sheath. It is equipped with additional straight or angled connector for joining lead wire with outer devices.

connector with bayonet mount
threaded connector, welded to sheath
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPE-L0384 RTD

Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.

stranded Cu wire 2×0,25 mm² with double silicone insulation
mounting in special seats of a valve, tees
sheath material:brass

price by request

Available

LIMATHERM TOPE – 244EXI RTD

Temperature sensor suitable for measurement of pipes and shafts. Rigid (pipe) sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C

radiator enhancing surface of heat reception
band clamp for mounting on a pipeline
sheath material: brass

price by request

Available

LIMATHERM TOPGN-1 RTD

Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.

Temperatura range -200÷600ºC RTD
sensing element: Pt100/Pt500/Pt1000 resistor
process connection with G1/2 or M20x1,5 thread
connection head type BA IP55, – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TOPE-462 RTD

Sensor suitable for temperature measurement of enclosures, movable parts and injection moulds.

flat (P) or tapered (S) tip
quick disconnect SZ with thread (standard – M12x1)
thread K (standard – M12x1)
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPW-1 RTD

Cable sensor can be equipped with plug for connection with portable temperature meters.

performance with head MA
PVC hand grip max. operating temperature 80°C
with transmitter 4÷20 mA (LTT-03J)
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPE-413 RTD

Temperature sensor with handgrip and pointed tip suitable for measurement of various types of meat and cold meat . It has an attestation issued by National Institute of Hygiene(PZH) for usage in contact with food because of the special materials it is made of.This sensor is terminated with miniature plug that enables its connection to portable temperature meter TES.

steel or tefl on hand grip
suitable for food industry
National Institute of Hygiene (PZH) attestation
sheath material: acid-resistant steel 1.4541

price by request

Available

LIMATHERM TOPE – 361EXI RTD

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C

standard (pipe) execution
mineral insulated execution with sleeve
Exi acc. to ATEX

price by request

Available

LIMATHERM TOPGB-55 RTD

Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

Temperatura range -200÷150ºC RTD
sensing element: Pt100/Pt500/Pt1000 resistor
process connection with G1/2 or M20x1,5 thread
connection head type MA IP54 – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TOPWO-1 RTD

Sensor suitable for temperature measurement in district heating substations. Sensor with welded connector is applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.

flexible protection hose, stainless,
fiberglass insulation, metallic overbraid
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPWE-1 RTD

Cable sensor can be equipped with plug for connection with portable temperature meters.

performance with head MA
PVC hand grip max. operating temperature 80°C
with transmitter 4÷20 mA (LTT-03J)
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPE-414 RTD

Temperature sensor with handgrip and pointed tip suitable for measurement of various types of meat and cold meat . This stainless steel sensor has attestation issued by National Institute of Hygiene (PZH) for usage in contact with food.

stainless steel 1.4541 hand grip
suitable for food industry
National Institute of Hygiene (PZH) attestation
sheath material: acid-resistant steel 1.4541

price by request

Available

LIMATHERM TOPE – 363EXI RTD

welded threaded connector
thermocouple sensor with insulated hot junction
sheath material:stainless steel 1.4541
Exi acc. to ATEX

price by request

Available

LIMATHERM TOPGN-55 RTD

Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

Temperatura range -200÷550ºC RTD
sensing element: Pt100/Pt500/Pt1000 resistor
process connection with G1/2 or M20x1,5 thread
connection head type MA IP54 – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TOPWO-2 RTD

Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.

flexible protection hose, stainless,
round (K), fl at (P), tapered (S) tips
bayonet fi tting with connector – nickel-plated brass
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPM-5 RTD

Temperature sensor suitable for measurement of surface to which it is attached. On the bottom of plastic housing aluminium radiator is placed, transferring heat from the adjacent surface. Thermometric resistor is placed in the radiator. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.

tangent surface temperature measurement
measuring plate
housing: material polycarbonate, IP67
material: aluminium

price by request

Available

LIMATHERM TOPCV-1 RTD

Temperature sensor suitable for measurement of aggressive liquid and gaseous media, especially in chemical industry, galvanizing plants, etc.

stranded Cu wire 2 or 4×0,22 mm² with double tefl on insulation
connection head type NS, IP54, -30÷130ºC
sheath material: acid-resistant steel 1.4541 hielded with heat-resistant PVC

price by request

Available

LIMATHERM TOPE – 365EXI RTD

movable threaded connector or nut
thermocouple sensor with insulated hot junction
sheath material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPGNN-2 RTD

Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.