- standard (pipe) execution
- mineral insulated execution with sleeve
- Exi acc. to ATEX
Products not found
Temperature sensor with special sanitary flange connection Clamp type suitable for measurement in food and pharmaceutical industry. It has National Institute of Hygiene (PZH) attestation.
- process connection fl ange Clamp acc. to PN-ISO 2852
- connection head type MAA, BA; IP 54 -40÷100ºC
- MBEG, BEG – material: stainless steel 1.4541, IP65, -40÷100°C
- sheath material: acid-resistant steel 1.4541
- National Institute of Hygiene (PZH) attestation
price by request
Read more
Available
Temperature sensor suitable for measurement of pipes and shafts. Rigid (pipe) sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C
- radiator enhancing surface of heat reception
- band clamp for mounting on a pipeline
- sheath material: brass
price by request
Read more
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -200÷600ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Read more
Available
Miniature, angular Pt100 sensor suitable for temperature measurement of small parts of machines and devices where precision is required.
- TOPMK-1 unsheathed resistor
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of surface to which it is attached. On the bottom of plastic housing aluminium radiator is placed, transferring heat from the adjacent surface. Thermometric resistor is placed in the radiator. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.
- tangent surface temperature measurement
- measuring plate
- housing: material polycarbonate, IP67
- material: aluminium
price by request
Read more
Available
Temperature sensor suitable for pipelines, pressure tanks and other devices used in food and pharmaceutical industry. This stainless steel sensor has National Institute of Hygiene (PZH) attestation.
- process connection with M10x1 or M20x1,5 thread
- connection head type MBEG – material: stainless steel 1.4541, IP65 -40÷100°C
- sheath material: acid-resistant steel 1.4541
- national Institute of Hygiene (PZH) attestation
price by request
Read more
Available
Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C
price by request
Read more
Available
Temperature sensor suitable for temperature measurement of liquid and gaseous media. Built-in LED display enables local temperature reading.
- Temperatura range -200÷550ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type XDI-80, IP65 – 20÷70ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Read more
Available
Miniature, angular Pt100 sensor suitable for temperature measurement of small parts of machines and devices where precision is required.
- TOPMK-2 sheathed resistor
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of ambient temperature, mainly in industrial space like warehouses, production halls, etc. as well as under roofs and open spaces. It has an aesthetic housing made of plastic adequate for wall mounting and perforated sheath made of anodized aluminium. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.
- perforated sheath
- humidity max. 85% RH
- housing: material polycarbonate, IP67
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor with special construction suitable for measurem
- temperature measurement in autoclaves
- suitable for food industry
- National Institute of Hygiene (PZH) attestation
- sheath material: acid-resistant steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D
- welded threaded connector
- thermocouple sensor with insulated hot junction
- sheath material:stainless steel 1.4541
- Exi acc. to ATEX
price by request
Read more
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷150ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Read more
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire and rotary nut.
- thread G⅛
- stranded Cu wire 2×0,22 mm2 or 4×0,22 mm2 with double silicone insulation
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of ambient temperature, mainly in industrial space like warehouses, production halls, etc. as well as under roofs and open spaces. It has an aesthetic housing made of plastic adequate for wall mounting and perforated sheath made of anodized aluminium. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.
- perforated sheath
- humidity max. 85% RH
- housing: material polycarbonate, IP67
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of aggressive liquid and gaseous media, especially in chemical industry, galvanizing plants, etc.
- stranded Cu wire 2 or 4×0,22 mm2 with double tefl on insulation
- connection head type NS, IP54, -30÷130ºC
- sheath material: acid-resistant steel 1.4541 hielded with heat-resistant PVC
price by request
Read more
Available
Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1
- movable threaded connector or nut
- thermocouple sensor with insulated hot junction
- sheath material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensors suitable for temperature measurement of liquid and gaseous media. Sensing element is placed directly in the thermowell.
- Temperatura range -200÷600ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Read more
Available
Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed.
- stranded Cu wire : 2×0,22 mm2
- 9 mm wide tip suitable for mounting to flat surfaces with M4 screw
- material: stainless steel 1.4541
price by request
Read more
Available
Temperature sensor suitable for measurement of living quarters and office space, mainly in ventilation and air-conditioning systems. Flexible housing made of plastic is adequate for wall mounting. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.
- without – unsheathed measuring resistor inside perforated housing
- humidity max. 85% RH
- material: ABS, IP-20
- mounting holes span 48 mm
price by request
Read more
Available
Temperature sensor suitable for measurement of aggressive liquid and gaseous media, especially in chemical industry, galvanizing plants, etc.
- stranded Cu wire 2 or 4×0,22 mm2 with double tefl on insulation
- connection head type NS, IP54, -30÷130ºC
- sheath material: acid-resistant steel 1.4541 hielded with heat-resistant PVC
price by request
Read more
Available
Temperature sensor suitable for measurement of liquids, semi-liquid masses or loose materials. Temperature measurement can be carried out in a permanent or temporary way. The results can be read on portable temperature meters suitable for resistance and thermocouple sensors. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 2÷5mm)
- cable gland ATEX II GD II IP65
- Exi acc. to ATEX
- housing: aluminium alloy
- material: stainless steel 1.4541
price by request
Read more
Available