Products not found
Gauge Pressure transmitters compare a pressure relative to atmospheric measure.
price by request
Available
- SMART Transmitter, -20mA + HART protocol
- Span limits: 0 to 100 bar
- Rangeability : 100:1
- Accuracy : 0.2% (0.1% as an option)
- Power supply 10.5 to 45VDC
- Process wetted parts material: 316L st. st., Hastelloy, Monel, Tantalum,
- Process connection ¼”-18NPT (oval flanges on request)
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEx certification, Stainless Steel electronic housing
price by request
Available
Gauge Pressure transmitters compare a pressure relative to atmospheric measure.
price by request
Available
The Series 3500 Smart Differential Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The Series 3500 is capable of being configured for differential pressure or level applications with the zero and span buttons. A field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3500 can be configured to be ATEX or IECEX approved for use in hazardous (classified) locations. The rangeability allows the smart transmitter to be configured to fit any application.
price by request
Available
Pressure transmitter with local readout DS 4” (100mm)
✔ Double elastic element: Bourdon tube and electronic sensor.
✔ Vibrations and pulsations proof.
✔ EMC immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Calibration: adjustable.
price by request
Available
Gauge Pressure transmitters compare a pressure relative to atmospheric measure.
price by request
Available
Pressure transmitter with local readout, for homogenizer DS 4” (100mm)
✔ Construction and finishing: as per 74-06.
✔ Sterilization temperature: +302°F (+150°C) max.
✔ Double elastic element: Bourdon tube and electronic sensor.
✔ Vibrations and pulsations proof.
✔ EMC immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
Gauge Pressure transmitters compare a pressure relative to atmospheric measure.
price by request
Available
Pressure transmitter for industrial application, compact design, ceramic sensor
The ST1 model is a compact electronic transmitter with ceramic sensor for air, industrial and technical gases, water and oil.
price by request
Available
Gauge Pressure transmitters compare a pressure relative to atmospheric measure.
price by request
Available
Pressure transmitter for industrial application, compact design, piezoresistive sensor
The ST2 model is a compact electronic transmitter with piezoresistive sensor with excellent linearity, for air, industrial and technical gases, water, oil and process media compatible with AISI 316.
price by request
Available
AE10 is a series of high performance compact pressure transmitter by using ASIC signal conditioning chip and dryceramic capacitive pressure sensor. It has features of anti-corrosion, anti-wear, shock resistance and vibration resistance. lts anti-overload capacity is 5~10 times of therange, completely solved poor overload in small range of other sensors.
price by request
Available
Pressure transmitter for industrial application, piezoresistive sensor
The ST9 model is an electronic transmitter with piezoresistive sensor with excellent linearity, with adjustable zero and span, for air, industrial and technical gases, water, oil and process media compatible with AISI 316. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available
A pressure transmitter is a mechanical device that measures the expansive force of a liquid or gaseous sample.
Also known as a pressure transducer, this type of sensor is typically composed of a pressure sensitive surface area made of steel, silicon, or other materials depending upon the analyte’s composition. Behind these surfaces are electronic components capable of converting the applied force of the sample upon the pressure sensor into an electrical signal.
price by request
Available
Pressure transmitter for industrial application, ceramic sensor
The ST18 model is an electronic transmitter with ceramic sensor, with adjustable zero and span, for air, industrial and technical gases, water and oil. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available
Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.
price by request
Available
Piezoresistive pressure transmitter flush diaphragm, double sealing, 0,5% accuracy
price by request
Available
Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.
price by request
Available
Pressure transmitter flush diaphragm
✔ Wetted parts: st.st.AISI 316L.
✔ Process fluid temperature: up to 300°F (+150°C).
✔ EMC emission and immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.
price by request
Available
Pressure transmitter for food industry and sanitary applications
✔ Construction and finishing: as per 74-06.
✔ Wetted parts: AISI 316L st.st.
✔ EMC emission and immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Series 645 Wet/Wet Differential Pressure Transmitters are designed for use with compatible gases and liquids which can be applied to both the pressure and reference ports. Quick response capacitance sensor delivers a 4 to 20 mA output signal proportional to differential pressure with ±.25% accuracy. The Series 645 transmitters are ideal for process control, filter condition monitoring, refrigeration equipment, pump speed control, HVAC equipment, and liquid level measurement. For ease of installation and maintenance, order optional 3-valve manifold assembly. Bleed ports allow for total elimination of air in the line and pressure cavities.
price by request
Available