Products not found
The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.
Retail price from $384,65
Available
- Poison Resistant (PRP) and High Temperature (HT) versions
- 3, 4 or 5 wire connection
- Stainless steel sensor body
- Complete range of accessories
- Fast response time
- Excellent performance cost ratio
- Safety Integrity Level – SIL 2
price by request
Available
All ALTAIR 2X Gas Detectors
- Incorporate proven XCell sensor technology
- Enhance worker safety, compliance and traceability
- Minimize cost of ownership
- Demonstrate rugged durability
price by request
Discontinued
The S531 Smart Ultrasonic Leak Detector provides time-efficient leak detection of compressed air and gas systems, even from a distance. The Leak Detector is offering state-of-the-art features and benefits.
price by request
Available
- Unit detects O2, ClO2, HCN and PH3
- Gas concentration (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen displayed on a large, clear, backlit LCD
- Automatically records the last 50 alarm/test events while simultaneously recording peak gas readings or low O2 readings every three minutes in a periodic data log
- Rubberized armor housing and one-button operation for maximum durability and simplicity
- Easy alarm check, bump check, fresh air zero, and calibration
price by request
Available
The S530 Ultrasonic Compressed Air Leak Detector offers an affordable and easy-to-use leak detection solution for compressed air and gas systems. The detection of leaks in compressed air systems by the S530 can help to avoid up to 30% of Energy costs per year.
price by request
Available
- Sensor options for CO, H2S, and O2
- Patented electrochemical sensors and MSA-built button sensors
- Stainless steel and solid electrolyte construction virtually eliminate sensor leakage
- Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port
- No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm
- Rubberized armor housing and one-button operation for maximum durability and simplicity
price by request
Available
- Designed with fully integrated connectivity for real-time visibility across your worksites from Day One
- CAT-M LTE cellular connectivity and integration with the MSA Grid
- Deploys in seconds, right out of the box. No IT required
- Rugged, durable design and Industry-Leading XCell Sensors
- Survives a 25-foot drop test. Breakthrough sensor design enables faster response and shorter span calibrations
- 1 to 4 gas options available. Sensor Options: Combustible (LEL), Oxygen, Carbon Monoxide, Hydrogen Sulfide, Methane, H2S Low-Concentration, CO – Hydrogen Resistant
price by request
Available
Instantly detect pressurized gas leaks with this high-precision, omni-direction acoustic detector utilizing Gassonic® ultrasonic technology. Works even when traditional methods of gas detection are unsuitable or dependent on ventilation. The Observer-i UGLD provides an industry-leading detection range (up to 28 m) reducing the number of detectors required.
price by request
Available
- Survives 25 drops from 4 feet (1.2 meters) (MIL-STD-810G 516.6 Transit Drop 3rd Party Certified)
- Can survive an incidental 25-foot (7.5-m) drop onto concrete
- Operating temperature range: -40°F to +140°F (-40°C to +60°C)
price by request
Available
It operates over a wide temperature range using a variety of gas sensing technologies. Breakthrough XCell® gas sensors with TruCal® technology extends calibration cycles up to 24 months and actively monitors sensor integrity for ultimate peace of mind.
price by request
Available
- XCell exotic SO., NO., Cl., and NH. Sensors for expanded monitoring applications
- Sensor response and clear times in less than 15 seconds for most
common sensor configuration - Bump test in less than 15 seconds for most common sensor configuration
- Span calibration time of 60 seconds for most common sensor configuration
- Greater signal stability and repeatability under changing or extreme environmental conditions
- All XCell Sensors are capable of plug-and-play installation for easy reconfiguration
price by request
Available
- Sensitive to both small (ppm.meter) and large (LEL.meter) gas leaks using dual detection ranges
- Ideal for use in harsh environments (-55°C)
- Single detection beam improves accuracy and reduces drift
- Continuous self-check for fail-to-safe operation
- Multiple communication outputs (HART, Modbus, AMS support) provide complete status and control capability in the control room
- Unitized display makes it easy to operate
- Automatic gain control compensates for dirty optics, rain, and fog
price by request
Available
The Q-Trak XP Indoor Air Quality Monitor Model 7585 combines multiple gas and particle measurements into a single lightweight, handheld instrument that is easy to use, configure and calibrate in the field.
price by request
Available
The ULTIMA X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter’s advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.
price by request
Available
Providing a comfortable, safe and healthy indoor environment is an increasingly important concern. Good indoor air quality increases concentration and productivity which can reduce lost days due to absence.
price by request
Available
- Gas-specific Harmonic Fingerprint detection eliminates false alarms and prevents plant shutdowns
- SimuGas automated function checks are recorded daily and eliminate need for manual intervention
- Tuneable lasers scan more narrow portion of spectrum where water interference from weather conditions are minimized
- Bluetooth wireless technology and SITE software
- Senscient ELDS lasers are hard on fog, rain, and snow
- Fastest responding device for safety critical ventilation zone and cross duct applications
price by request
Available
TSI IAQ-Calc Meters are outstanding instruments for investigating and monitoring indoor air quality (IAQ).
price by request
Available
- Industry-leading speed & response: T90 ≤ 3 seconds even with splash guard installed
- No routine calibration required reducing maintenance costs
- Industry standard 4-20 mA output provides remote alarm and fault indication
- Multiple communication outputs provide complete status and control capability in the control room
- Heated optics eliminate condensation
- Dirty optics indication discriminates between true fault and cleaning requirements
- Fast calibration times reduce amount of cal gas required which lowers maintenance time and costs
price by request
Available
Worldwide use in hospitals, home-care, laboratories, and manufacturing
price by request
Available
- The indoor/outdoor PrimaX P Gas Transmitter detects toxic gases, oxygen and combustible gases
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Optional configurable Alarm and Fult relays
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance, while three LEDs give clear status indication
- Isolated outputs version available allowing for a separate power supply and output signal to a PL
price by request
Available
- The indoor/outdoor PrimaX I Gas Transmitter detects toxic gases and oxygen
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance
price by request
Available
- Measuring Range 0 – 100% LEL
- Outputs
- Protection Rating Dual IP66 and IP67
- Temperature Range -40°C to 75°C (-40°F to 167°F)
price by request
Available
- Dual source design provides redundancy and reliable, uninterrupted performance
- Heated optics prevent condensation buildup
- 4–20 mA analog output
- Easy connection using stainless steel junction box
- SIL 2 design provides safety system integration capability
- 316 stainless steel, IP 67-rated, rugged housing protects unit from environmental extremes
price by request
Available